Wells WVAE-55FS Provozní pokyny stáhnout pdf (Strana 10)

Operation and Care Manual #8452/53/55

PG.9

CONTROLS • FUNCTIONS • OPERATION

FRYER

CONTROL PANEL

ITEM  POWER SWITCH (FRYER • OFF • FILTER)

Pressing the switch on the fryer control

panel to the "FRYER" position will energize

the ventilator.

ITEM  VENTILATOR POWER ON INDICATOR

(

GREEN)

When the fryer is energized, the ventilator

power ON indicator light will illuminate

and the blower will begin to operate for a

period of 10 seconds.

If sufficient air flow is established within

this 10 second period, the power on light

will remain illuminated and the fryer will

be operational.

If there is not sufficient air flow for proper

operation within this 10 second period, the

blower and ventilator power light will turn

OFF, the service required light will

illuminate, and the fryer will not operate.

Insufficient air flow requires the operator

to switch the fryer control to the

OFF

position for a short period of time before

attempting to reestablish operation.

Under normal operation, the green ventilator

power

ON indicator will be the only light

illuminated on the ventilator panel.

ITEM  CHECK FILTERS INDICATOR (AMBER)

The check filters indicator will illuminate

when the Grease Vapor HEPA filter is

missing or not properly installed or the

Stainless Steel Baffle filter is not properly

installed. When the check filters light is

illuminated, the fryer is inoperable.

If the check filters light illuminates, check

both the Stainless Steel Baffle filter and

Grease Vapor HEPA filter for proper

installation. Always replace the HEPA

filter and charcoal filter at the same time.

When the check filters light is off, the fryer

will operate normally.

ITEM  REPLACE FILTERS INDICATOR (AMBER)

The "Replace Filter" light is directly tied to

an air flow diagnostic device which

measures the air pressure through the filter

system. This light will illuminate when the

Grease Vapor filter and the Odor Control

filter accumulates a sufficient amount of

grease build-up to impede air flow. This

light is a clear indication to replace both

filters. While the fryer will still operate

normally, the air filter must be changed in

a timely manner or the service required

light will illuminate and the fryer will not

operate until the air filters have been

replaced.

ITEM  SERVICE REQUIRED INDICATOR (RED)

Failure to replace Odor Control and the

Grease Vapor HEPA filters within

approximately one week from the date the

"Replace Filter" light illuminates will result

in the illumination of the "Service

Required" indicator. Once the "Service

Required" light is illuminated, the fryer

will become inoperable until both filters

are replaced. Once the filters are replaced,

reset the fryer by pressing the power

switch to the

OFF position, immediately

followed by pressing the switch of the

Fryer to the

ON position.

SERVICE POWER FAILURE

If the shutdown is caused by a service power

failure, the fryer can be restarted by cycling the

power switch to

OFF and then ON.

The Ventilator Hood manual is to be used in conjunction with the fryer manual supplied with this product.



1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 28 29

Komentáře k této Příručce

Žádné komentáře